Guys, din pacate ramanem fara hosting moca la forum :( As dori sa tinem forumul in picioare, eventual sa-l "resuscitam". Rog sa donati 1 euro, sau cat puteti, sa ne luam hosting.

Alte metode de a ajuta: cand cumparati ceva de pe EMAG, dati click pe orice produs de aici.. E echivalentul unei mici donatii.
Also, la aplicati codul "3L6L3REE" in cos (1% reducere). pentru alte magazine, click pe LOGO de aici:,, , sau cautati magazinul aici. Thanks!

the bubbles produced

Seriale, filme, noutati.

the bubbles produced

Postby qizhen0809 » 16 May 2018, 10:08

<p>How can we control the bubbles produced in insulating glass glue 1, to solve the hydrogen-containing silicone oil bubble control method: strict raw materials, can not be used to seal the dehydration of glass and plastic raw materials, especially raw materials doped with a trace of hydrogen-containing silicone oil and other hydrogen energy substances, Avoid composite decking dealers in uk air bubbles.</p> <p>The sealing glass glue has too fast curing reaction due to high ambient temperature, high humidity, or excessive addition of component B, resulting in the release of small molecules of by-products that can cause the release of the sealed glass glue to be discharged into bubbles formed in time. The solution to this problem is to: a. Control the ambient temperature and humidity of the production of demo cost to remove a deck floor insulating glass glue, and avoid construction under high temperature and rain.</p> <p> b, in strict accordance with the proportion provided by the sealed glass adhesive product specification to measure the ratio; c, from time to time to check the design diagram (such as glue pump, adjusting mechanism, mixing glue, glue gun, etc.), so as to ensure the mixing ratio column Correct. 3, found in the plastic machine leak and plastic wood wall paneling in Russia lead to bubble glass bubble, a slight leak, you can screw through the screw pump processing, if the leak is particularly serious, you must replace the new beat pump or replace the worn Sealing pad.</p> <p>Bubbles caused by non-standard construction: Generally, this situation is related to excessively rapid rubber injection. Therefore, the bubbles must be filled with moderate pressure. The mixed sealant should be glued in one direction and squeezed. Should be continuous, uniform, glue gun movement speed to always ensure that the extrusion of glue in the front of the gun mouth best gate for outdoor deck Indonesia prevail, that is, "push plastic" movement.</p>
[ Pwnage!!! ]
[ Pwnage!!! ]
Posts: 1604
Joined: 11 Nov 2016, 08:22

Return to Movies

Who is online

Users browsing this forum: No registered users and 1 guest